Every PPE check, aisle and hazard zone, watched in real time.
PPE compliance, forklift–pedestrian safety, near-collisions between vehicles and restricted-zone access — from the cameras your site already uses. Turn safety from spot audits into continuous monitoring, before a near miss becomes an injury.
- Works with your existing CCTV
- Faces anonymized by design
- Safety alerts in under 2 seconds
Your incident log counts events. It can't prevent the next one.
You know every injury, reported near miss and audit form — but not the pedestrian crossing the forklift aisle right now, the missing helmet or the restricted zone breached while no one is watching. Synapsi connects to your existing cameras and turns the physical site into live safety data, alongside the EHS systems you already use.
- Injuries analysed after the fact
- Near misses logged only if someone sees them
- PPE checked by occasional audits
- Restricted zones watched by eye alone
- Forklift–pedestrian near-collisions, live
- PPE compliance measured continuously
- Restricted-zone access flagged instantly
- Falls and risky behaviour detected live
Every safety metric, straight from your cameras.
No floor sensors, no wearables, no tag on every person or vehicle. Synapsi connects to your existing CCTV and turns it into the live numbers that keep workers safe.
PPE compliance
Helmets, hi-vis, gloves and eyewear verified on every person entering the area — not sampled in occasional audits.
Forklift and pedestrian safety
Detect people entering forklift paths and vehicle aisles — alert before a near miss becomes an injury.
Near-collisions between vehicles
Forklifts, pallet trucks and vehicles crossing too close — near misses between vehicles surface before impact.
Restricted and pedestrian zones
Unauthorized access to hazardous zones, under suspended loads or near live machinery — flagged the instant it happens.
Falls and risky behaviour
Falls, slips, working at height without protection and unsafe postures shown live — and searchable in the archive.
Escape routes and access
Blocked fire exits, obstructed extinguishers and crowding in critical areas detected in real time.
Near-miss prevention
Synapsi learns where and when people and vehicles get too close, surfacing near-miss hotspots before they cause harm — so EHS teams fix layout, timing and training, not just the report after the injury.
One platform, safety across the site.
Safety and EHS
Catch forklift–pedestrian near-collisions, PPE violations and restricted-zone access in real time — and turn incident reports into prevention.
Area and shift managers
See where and in which shift risky behaviour concentrates and act on layout, signage and targeted training.
Leadership and network
Compare sites on safety metrics from one view — and see the whole plant, with no blind spots.
Indicative figures from early safety pilots. Results depend on site layout and baseline.
From exposure to near miss — every stage, in real numbers.
Follow risk across the site like a flow diagram: how many potentially dangerous interactions happen, how many become near misses and exactly where you need to act right now.
Average site PPE compliance — measured continuously, up after fixing the most critical entry point.
The riskiest zone right now (72% of near misses) — the forklift–pedestrian crossing to redesign.
Forklift–pedestrian near-collisions flagged this week, each tied to a location and a time.
Warehouses, indoor construction sites, plants and logistics sites.
Warehouses and logistics sites
Forklift–pedestrian safety, PPE compliance and restricted-zone monitoring in sites with heavy vehicle traffic.
Indoor construction sites
Helmet and harness use, work at height and access to work-in-progress areas monitored continuously.
Manufacturing and plants
Line-side safety, machine guarding and risky behaviour across production and assembly areas.
Depots and yards
Near-collisions between vehicles, vehicle–pedestrian safety and load handling in storage and manoeuvring areas.
"We logged near misses on paper and only saw a fraction of them. Synapsi showed us the exact aisle and shift where pedestrians and forklifts kept crossing — so we redesigned the route, not the report."Representative scenario · Site EHS
Forklift–pedestrian injuries and near misses after acting on the hotspots Synapsi surfaced.
We answer your questions.
Do we need new cameras, tags or wearables?
No. Synapsi connects to the IP/CCTV cameras your site already uses. No floor sensors, RFID tags or wearables to install — we point the platform at your existing streams and start producing live safety data.
How reliable is PPE and near-miss detection?
Detection runs at 98.4% accuracy on production datasets, with alerts shown in under two seconds. Forklift paths, restricted zones and PPE rules are configured per camera, so warnings reflect your site's real geometry and safety rules.
Can it integrate with our EHS and safety systems?
Yes. Safety events, PPE violations and near misses are available via API and export, so they sit alongside the EHS, BI and alerting tools your teams already use — and can trigger existing notification workflows.
How do you handle worker privacy?
Synapsi is privacy-by-design. Analytics are anonymous detections and movement patterns — faces are not identified and processing happens on the edge, so raw footage stays on your network. The platform is built to be GDPR-compliant and to respect rules on worker monitoring.
See your safety, measured.
Nothing to install and no setup. In a 30-minute demo we'll show you Synapsi on a real safety scenario — PPE compliance, forklift–pedestrian near-collisions and restricted-zone access.
We respect your privacy